PDI® PowerPak™ 2 Power Distribution Unit
With hundreds of possible distribution configurations, PDI® PowerPak™ 2 PDU is smallest power distribution unit with true front accessibility in today’s market. A patent pending 3D access window allows true front access (TFA) for service and maintenance while offering panel board and/or sub feed distribution in the main cabinet. PDI® PowerPak™ 2 offers up to 400kVA DOE2016 transformer and incorporates compartmentalized design in order to isolate low and high voltage components.
Five Tier True Front Access (TFA)
Five Tier True Front Access (TFA) enables operation, maintenance and service from the front of the PDU maximizing safety.
Smallest foot-print in the industry
The PDI® PowerPak™ 2 PDU can accommodate up-to a 400kVA DOE2016 transformer while maintaining a True Front Access (TFA) main cabinet size of 42” width.
Front Access Infrared Scanning
A patent pending 3D Access Window and Specialized Transformer designs enable infrared scanning from the front of the PDU.
Up-to 400kVA DOE2016 Transformer
Flexible In-Cabinet and Side-Car Distribution Options
The PDI® PowerPak™ 2 PDU offers multiple distribution panelboard and sub feed options in-cabinet and in optional side cars.
PDI continues to advance it’s monitoring solutions. We now have two monitoring products available for the PDI® PowerPak™ 2 PDU.
PDI® WaveStar® Infinity Monitoring
PDI® WaveStar® Infinity provides facilities and businesses with the most advanced power distribution equipment monitoring and metering solution to help them make prompt and informed decisions to support fault detection, energy management and tenant billing applications.
Intelligent Power Monitoring
PDI’s Branch Circuit Monitoring System (BCMS) allows for the pro-active management of power usage and availability.
Adaptable Service Entrances
Landing service entrance cables has never been easier with Top/Bottom Entry/Exit configurations.
|kVA Rating||100kVA – 400kVA|
|Input||3-phase, 3-wire plus ground|
@ 50 Hz: 380V – 415V
@ 60 Hz: 600, 480 or 208V
|Output||3-phase, 4-wire plus ground|
@ 50 Hz: 575, 415/240, or 380/230V
@ 60 Hz: 600, 575, 480, or 208/120V
200% neutral busbar connection
Listed to UL 60950-1, CSA C22.2#60950-1, UL 891, IEC 60950-1, EN 60950-1, EN 61000-6-2, EN 61000-6-4
DOE2016 transformers standard for USA.
Operating Efficiency: 98% or better.
Copper wound construction – better conducting and more resilient than aluminum.
Dual electrostatic shield – attenuates high frequency noise.
Oversized 200% neutral conductor.
Common mode noise protection.
Transverse mode noise protection.
Optional Quad-Wye® Technology solves harmonic problems by canceling the destructive triplen and non-triplen current harmonics.
NEMA 1 enclosure with removable front, side, and rear panels.
Integrated two-point latch and vision panels.
Flush-mounted door handle with integral locks.
Advanced door catch assures positive closure.
Optional floor skirts.
Operating Temperature: ambient 0°C to 40°C.
Relative humidity: 0% to 95% non-condensing.
Altitude ≤ 10,000 ft.
50 Hz Operating Range: 47-53 Hz.
60 Hz Operating Range: 57-63 Hz.
Storage Temperature: ambient -10°C to +40°C.
Monitor: PDI® WaveStar® Infinity Monitor.
Communications: Native Modbus RTU. Native Modbus TCP. SNMP (Version 1 & Version 2). Native TCP/IP WebServer (HTML 5 Support).
Display: 7 inch Color Touchscreen.
Data Refresh Rate: 1 second.
Panelboad Monitoring.Option B
Monitor: WaveStar® monitor.
PDI® WaveStar® color touch monitor.
Communications: Serial RS-485 Modbus RTU; optional SNMP or TCP/IP communications.
BCMS: Available as factory-installed option.
Options: Per circuit output monitoring.
Thermal: Dual transformer thermal sensors.
True RMS metering.
Accurate kW, power factor and THD measurement.
|Transient Suppression Network (TSN)||An integrated system engineered to meet ANSI/IEEE category C standards for transient voltages and surge currents.|
|Lightning Arrestor/Surge Suppressor||Protects the insulation of the system magnetics.|
|Distribution Panelboards/Sub-Feed Breakers||Customized distribution configurations meet the demands of any facility.|
|Redundant Power Distribution Systems||
WaveStar® Manual Dual System
Dual-Input power distribution system allows for manual source selection to isolate upstream equipment and facilitate system maintenance and repair.
|Customization||PDI is dedicated to providing customized solutions to meet the specific requirements of your application. Contact us at +1.800.225.4838 for further information and support.|
|PDI Service Support||After your equipment has been installed, call on the PDI Service team for 24/7 support. With 35 years of mission critical power experience and seasoned factory-trained service staff, PDI Global Services can maximize the benefit of your equipment investment.|
- PDI® PowerPak™ 2 Power Distribution Unit Brochure
- PDI® PowerPak™ 2 PDU Specifications – PDF
- PDI® PowerPak™ 2 PDU Specifications – DOC
- PDI® PowerPak™ 2 PDU Installation and Operation Manual
- PDI® PowerPak™ 2 – User Guide – Revit Family Model Library
- PDI® PowerPak™ 2 Revit Family Model Library
- PDI® WaveStar™ Color Monitor, Setup and Operation
- PDI® WaveStar™ Infinity Monitoring System, Setup and Operation Manual
- PDI™ Universal STS and PDU Floor Stands