WaveStar® PowerHub® 2 PDU
Available in sizes ranging from 375 – 1.25 MVA, PowerHub 2 is a powerhouse PDU. It’s industry leading 60” wide x 40” deep true front access cabinet makes it the smallest footprint in its class. Known for its centralized brazed bus system the PowerHub 2 provides up to (12) 400A or (16) 225A 100% rated sub feed distribution breakers. It’s compartmentalized design isolates controls and high voltage components which simplifies maintenance and increases operator safety. Front Access Infrared Scanning ensures maximum reliability and uptime for your mission critical facility. For pro-active management of power usage and availability, the PowerHub 2 utilizes Intelligent Power Monitoring through the WaveStar® BCMS, or Branch Circuit Monitoring System including a class-leading 7” color touchscreen display.
Four-tier True Front Access Cabinet
The 60″ wide x 40″ deep Four-tier True Front Access Cabinet maximizes square footage utilization and enables all operation, maintenance and service from the front of the PDU.
Front Access Infrared Scanning
Full swing out front doors and an unobstructed view cabinet design enable infrared scanning of all bolted line and load connections.
375 to 1MVA DOE2016 Transformer
PowerHub 2 offers DOE-compliant transformers in sizes from 375 to 1MVA. Up to 1.25 MVA High Efficiency Transformer.
Future-Proof Dual and Triple Output Transformer
Compartmentalized Controls & High Voltage Enclosures
Isolated compartments for both controls and high voltage components simplifies maintenance and increase operator safety.
PDI continues to advance it’s monitoring solutions. We now have two monitoring products available for the PowerHub 2 PDU.
Option A
WaveStar Infinity Monitoring
WaveStar Infinity provides facilities and businesses with the most advanced power distribution equipment monitoring and metering solution to help them make prompt and informed decisions to support fault detection, energy management and tenant billing applications.
Option B
Intelligent Power Monitoring
PDI’s Branch Circuit Monitoring System (BCMS) allows for the pro-active management of power usage and availability.
Brazed Transformer Connections
Brazed transformer connections decrease electrical resistance and eliminate the need for transformer infrared scanning.
Centralized Bus Design
PowerHub 2 provides up-to 12 (400A) and up-to 16 (225A) sub feed distribution breakers via a centralized bus design.
Adaptable Service Entrances
Landing service entrance cables has never been easier with Top/Bottom Entry/Exit configurations.
| Ratings | |
| kVA rating | 375kVA – 1.25MVA |
| Input | 3-phase, 3-wire plus ground |
| Input Voltage |
@ 50 Hz: 380V – 415V
@ 60 Hz: 600, 480 or 208V
|
| Output | 3-phase, 4-wire plus ground |
| Output Voltage |
@ 50 Hz: 380/220, 400/231, 415/240VAC
@ 60 Hz: 600/346, 575/332, 480/277, 415/240VAC or 208/120VAC
|
| Listed to UL | 1062, UL 1950, CSA Certified |
| Operating Temperature | ambient 0°C to 40°C |
| Relative humidity | 0% to 95% non-condensing |
| Altitude | ≤ 6,600 ft. |
| 50 Hz Operating Range | 47-53 Hz |
| 60 Hz Operating Range | 57-63 Hz |
| Storage Temperature | ambient -10°C to +40°C |
| Monitoring |
Option A
Monitor: WaveStar® Infinity Monitor. Communications: Native Modbus RTU. Native Modbus TCP. SNMP (Version 1 & Version 2). Native TCP/IP WebServer (HTML 5 Support). Display: 7 inch Color Touchscreen. Data Refresh Rate: 1 second. Transformer Monitoring. Sub-Feed Monitoring. Panelboad Monitoring.Option B Monitor: WaveStar® monitor. WaveStar® color touch monitor.
Communications: Serial RS-485 Modbus RTU; optional SNMP or TCP/IP communications.
BCMS: Available as factory-installed option.
Options: Per circuit output monitoring.
Thermal: Dual transformer thermal sensors.
True RMS metering.
Accurate kW, power factor and THD measurement. |
